Importance of the Correlation between Width and Length in the Shape Analysis of Nanorods: Use of a 2D Size Plot To Probe Such a Correlation

Analysis of nanoparticle size through a simple 2D plot is proposed in order to extract the correlation between length and width in a collection or a mixture of anisotropic particles. Compared to the usual statistics on the length associated with a second and independent statistical analysis of the width, this simple plot easily points out the various types of nanoparticles and their (an)isotropy. For each class of nano‐objects, the relationship between width and length (i.e., the strong or weak correlations between these two parameters) may suggest information concerning the nucleation/growth processes. It allows one to follow the effect on the shape and size distribution of physical or chemical processes such as simple ripening. Various electron microscopy pictures from the literature or from the authors′ own syntheses are used as examples to demonstrate the efficiency and simplicity of the proposed 2D plot combined with a multivariate analysis.     

Selective Growth and Structural Analysis of Regular MnO Nanooctapods Bearing Multiple High‐Index Surface Facets

Although numerous morphologies of MnO nanostructures have been reported, an exact structural analysis and mechanistic study has been lacking. In the present study, the formation of regular MnO octapods was demonstrated in a simple procedure, comprising the thermal decomposition of manganese oleate. Because of their structural uniformity, an ideal three‐dimensional model was successfully constructed. The eight arms protruded from the cubic center with tip angles of 38° and surface facets of {311} and {533} with rounded edges. The concentrations of oleate and chloride ions were the determining factors for the octapod formation. Selective coordination of the oleate ions to the {100} faces led to edge growth along the <111> direction, which was then limited by the chloride ions bound to the high‐index surface facets. These structural and mechanistic analyses should be helpful for understanding the complex nanostructures and for tuning their structure‐related properties.     

航空导管弯曲试验的疲劳裂纹萌生寿命

飞行器液压导管受接头和卡箍等约束，在使用的振动环境中，会因弯曲应力而导致破裂，影响到飞行安全．本文对飞行器液压系统通用的不锈钢导管的裂纹萌生寿命进行了试验研究．首先在对8 mm、12 mm 无缺陷导管和含U 型缺口8 mm 导管的疲劳试验和有限元分析的基础上，得到了导管的最大拉应变-裂纹萌生寿命数据．然后采用基于强度极限和弹性模量估算法的Manson-Coffin 公式来预测导管裂纹萌生寿命．最后引入加载类型修正系数、表面质量修正系数、试样尺寸修正系数、应力集中敏感系数和有效应力集中系数，使修正后的公式对三种类型的导管均有较好的裂纹萌生寿命预测精度．     

Heterointerface Engineering of ZnO/CdS Heterostructures through ZnS Layers for Photocatalytic Water Splitting

Solar-driven water splitting to produce clean and renewable hydrogen offers a green strategy to address the energy crisis and environmental pollution. Heterostructure catalysts are receiving increasing attention for photocatalytic hydrogen generation. ZnO/ZnS/CdS and ZnO/CdS heterostructures have been successfully designed and prepared according to two different strategies. By introducing a heterointerface layer of ZnS between ZnO and CdS, a Z scheme charge-transfer channel was promoted and achieved superior photocatalytic performance. A highest hydrogen generation rate of 156.7 μmol g⁻¹ h⁻¹ was achieved by precise control of the thickness of the heterointerface layer and of the CdS shell. These findings demonstrated that heterostructures are promising catalysts for solar-driven water splitting, and that heterointerface engineering is an effective way to improve the photocatalytic properties of heterostructures.     

考虑重力因素的断溶体储层“井-洞-缝”模型试井解释方法

顺北油田属于大型断裂构造运动形成的断溶体储层，纵向裂缝系统和垂向分布的溶洞是主要的储集体空间.本文提出溶洞中的压力变化是由流动和波动共同产生的，依此把能量守恒方程与试井理论相结合，建立考虑重力因素的断溶体储层试井解释方法.定义无量纲量，并对无量纲方程进行Laplace变换，得到Laplace空间上的井底压力.由Stehfest数值反演算法得到试井分析所需的图版曲线.对重力因素进行敏感性分析表明：重力因素只影响双对数曲线的末期，当重力因素很明显时，曲线特征类似于定压边界.对新疆油田的某井进行分析，解释了曲线后期下掉原因，并给出溶洞体积以及波动相关参数等，分析结果与生产实际情况相吻合.     

量子垒生长速率对InGaN基绿光LED性能的影响

利用MOCVD技术在图形化Si(111)衬底上生长了InGaN/GaN绿光LED外延材料。在GaN量子垒的生长过程中,保持NH3流量不变,通过调节三乙基镓(TEGa)源的流量来改变垒生长速率,研究了量子垒生长速率对LED性能的影响。使用二次离子质谱仪(SIMS)和荧光显微镜(FLM)分别对量子阱的阱垒界面及晶体质量进行了表征,使用电致发光测试系统对LED光电性能进行了表征。实验结果表明,垒慢速生长,在整个测试电流密度范围内,外量子效率(EQE)明显提升。我们认为,小电流密度下,EQE的提升归结为量子阱晶体质量的改善;而大电流密度下,EQE的提升则归结为阱垒界面陡峭程度的提升。     

A new aliphatic ester of hydroxysalicylic acid from fermented Carica papaya L. preparation with a potential hair growth stimulating activity

Abstract

An aliphatic ester of hydroxysalicylic acid (6), reported for the first time from a natural source in addition to five known compounds were isolated from the fermented Carica papaya L. preparation, a commercialized functional food. The known compounds were identified as 5-hydroxymethylfurfuraldehyde (1), trans-caffeic acid (2), butyl 4-hydroxybenzoate (butylparaben) (3), lycopene (4), benzyl isothiocyanate (5). Compounds 1 and 3 were reported for the first time from Papaya fruits through this study. The new compound showed a moderate antioxidant activity and a potent hair growth stimulating activity in vitro.     

磁电弹性体中多条位错与Griffith裂纹

根据本征方程，研究磁电弹性体中若干平行螺型位错与Griffith裂纹的相互作用.结合Muskhelishvili方法和算子理论，得到磁电弹性体中由位错和裂纹所诱导的应力场、电场和磁场的解析解.数值算例表明：在裂纹的端点及位错点上仍然存在应力的奇异性，离位错点越远处广义力越小，结论与已有的结果相符，证明了结论的正确性.当位错点与裂纹端点距离越近时，裂纹与位错间的应力场越小，并逐渐趋近于零.     

含孔隙混凝土二维细观建模方法研究

根据混凝土的细观组成和结构特点,对传统二维建模方法加以继承与改进,提出了一种高效的分步入侵判定算法.将孔隙直观地反映在模型中,建立了不同的含孔隙混凝土细观模型.对含圆形、椭圆形、多边形骨料与圆形、椭圆形孔隙的混凝土标准试件分别进行了建模研究,结果表明本文的算法具有较强适用性.同时,通过对不同面积率与多种形状骨料/孔隙混凝土的大量建模进一步验证了该算法的效率.模拟了混凝土试件在单轴压缩下的准静态力学性能,分析了混凝土内部孔隙对其裂纹扩展的主要路径、破坏模式以及宏观力学性能的显著影响.     

High Ethylene Selectivity in Methanol‐to‐Olefin (MTO) Reaction over MOR‐Zeolite Nanosheets

Precisely controlled crystal growth endows zeolites with special textural and catalytic properties. A nanosheet mordenite zeolite with a thickness of ca. 11 nm, named as MOR‐NS, has been prepared using a well‐designed gemini‐type amphiphilic surfactant as bifunctional structure‐directing agent (SDA). Its benzyl diquarternary ammonium cations structurally directed the formation of MOR topology, whereas the long and hydrophobic hexadecyl tailing group prevented the extensive crystal growth along b axis. This kind of orientated crystallization took place through the inorganic–organic interaction between silica species and SDA molecules present in the whole process. The thin MOR nanosheets, with highly exposed (010) planes and 8‐membered ring (MR) windows, exhibited a much improved ethylene selectivity (42.1 %) for methanol‐to‐olefin (MTO) reactions when compared with conventional bulk MOR crystals (3.3 %).